Airsculpt cost, procedure and cost saving tips

AirSculpt is a medical procedure that involves a minimally invasive technique for removing unwanted body fat. It is a trademarked term for a specific type of body contouring procedure called “AirSculpt technology” or “AirSculpting.” This technique is offered by a company called Elite Body Sculpture. The cost of AirSculpt depends on various factors explained below.

Unlike traditional liposuction, which uses mechanical force to break up and suction out fat cells, AirSculpt uses a patented technology called “AirSculpt Power,” which uses a gentle, spinning motion to dislodge and remove fat cells. The procedure is performed under local anesthesia, and small incisions are made in the targeted area through which a small cannula is inserted.

The cannula is connected to a special device that generates controlled pulses of air, causing the fat cells to gently detach from the surrounding tissue. The fat cells are then suctioned out of the body through the cannula. The procedure is designed to be precise and targeted, allowing for more sculpting and contouring of the treated areas.

AirSculpt is often promoted as a minimally invasive alternative to traditional liposuction, with claims of less downtime, minimal scarring, and faster recovery. However, it’s important to note that individual experiences may vary, and it’s always best to consult with a qualified medical professional to determine the most suitable treatment option for your specific needs.

How much does airsculpt cost?

On average, the cost of AirSculpting can range from approximately $3,000 to $10,000 per treated area. However, it’s important to note that this range is an estimate and can vary significantly depending on various factors, such as the complexity of the procedure, the geographic location, the surgeon’s experience, and the specific clinic.

Beverly Hills – In Beverly Hills, the average cost of airsculpt is $10,000 to $15,000.

United States – The average cost of airsculpt in the United States is $3,000 to $10,000.

Factors that affect Airsculpt cost

The cost of an AirSculpt procedure can vary based on several factors. Here are some of the key factors that can influence the cost:

  1. Treatment Area: The size and number of areas being treated will impact the cost. Larger areas or multiple areas may require more time and resources, resulting in a higher price.
  2. The complexity of the Procedure: The complexity of the procedure, including the amount of fat to be removed and the difficulty of reaching the targeted areas, can affect the cost. Challenging cases may require additional expertise and time, which can increase the price.
  3. Surgeon’s Experience and Reputation: Highly skilled and experienced surgeons often charge higher fees for their expertise and reputation. Surgeons with a proven track record and positive patient outcomes may command higher prices for their services.
  4. Geographic Location: The cost of living and medical services can vary by location. Procedures performed in major metropolitan areas or regions with higher overhead costs may be more expensive than smaller cities or rural areas.
  5. Clinic or Facility: The reputation, quality, and amenities of the clinic or facility where the procedure is performed can influence the cost. Facilities that offer a high level of comfort, advanced technology, and personalized care may have higher fees.
  6. Additional Services or Treatments: Some clinics may offer additional services or complementary treatments as part of the package, such as post-operative care, follow-up consultations, or specialized garments. These additional services can affect the overall cost.

It’s essential to consult with the specific clinic or surgeon providing the AirSculpt procedure to get an accurate cost estimate tailored to your individual needs. They can provide detailed pricing information based on your desired treatment areas and other relevant factors.

Is AirSculpt Permanent?

AirSculpt, like other body contouring procedures, can provide long-lasting results. Still, it is important to note that the permanence of the results depends on several factors, including individual lifestyle choices and changes in weight.

The fat cells that are removed during AirSculpt are permanently eliminated from the treated areas. However, it’s crucial to maintain a healthy lifestyle, including regular exercise and a balanced diet, to avoid the accumulation of new fat cells in the remaining areas of the body. If a person gains weight after the procedure, the remaining fat cells in untreated areas can still enlarge, potentially affecting the overall body shape.

Additionally, the natural aging process and fluctuations in weight can impact body shape and contour over time. While AirSculpt can provide significant and long-lasting improvements, it does not halt the aging process or prevent future weight fluctuations.

To maximize the longevity of AirSculpt results, it’s essential to follow post-procedure instructions provided by the surgeon or medical professional, maintain a healthy lifestyle, and make sustainable choices to manage weight. Regular exercise, a balanced diet, and overall healthy habits can help maintain the desired body shape achieved through AirSculpt for an extended period.

Airsculpt cost for specific body parts:

Airsculpt can treat various body parts, including the chin, mommy makeover areas, the chest, arms, and hips. Here’s a breakdown of the average costs of air sculpting for a single treatment of some specific body parts:

Chin Airsculpt – The average cost of chin air sculpting is $3,000 to $5,000.

Airsculpt Mommy Makeover – The average cost of an air sculpt mommy makeover is $7,000 to $10,000.

Airsculpt Up-A-Cup – The average cost of air sculpting Up-A-Cup is $5,000 to $7,000.

Airsculpt Laser LipoThe average air sculpts laser lipo cost is $3,000 to $5,000.

Which Is Better AirSculpt Vs CoolSculpting?

To know which is better between the two let us understand what is CoolSculpting?

CoolSculpting is a non-invasive cosmetic procedure designed to reduce stubborn areas of fat on the body. It is also known as cryolipolysis. Developed by scientists at Harvard University, CoolSculpting works by using controlled cooling to target and freeze fat cells, which are then naturally eliminated by the body over time.

Here’s how the CoolSculpting procedure typically works:

  1. Assessment: A consultation with a trained professional is conducted to assess your body and determine if CoolSculpting is suitable for your specific needs. They will discuss your goals, areas of concern, and potential outcomes.
  2. Treatment planning: If you decide to proceed with CoolSculpting, the treatment plan is developed based on the areas you want to target. Common treatment areas include the abdomen, thighs, flanks, upper arms, and chin.
  3. Application of the device: During the procedure, a gel pad and applicator are applied to the targeted area. The applicator delivers controlled cooling to the fat cells beneath the skin, while protecting the surrounding tissues.
  4. Freezing and cooling: The controlled cooling targets the fat cells, causing them to crystalize and undergo a natural cell death process called apoptosis.
  5. Duration: Each CoolSculpting session typically lasts around 35 to 60 minutes, depending on the size and number of areas being treated.
  6. Sensations during treatment: Initially, you may feel intense cold and some pressure as the cooling begins, but these sensations typically subside after a few minutes as the area becomes numb.
  7. Post-treatment: After the procedure, the treated area may feel numb, tingly, or slightly sore, but these effects are temporary and generally resolve on their own.
  8. Results and recovery: Over the following weeks and months, the body naturally eliminates the destroyed fat cells through its metabolic processes. Some people begin to see noticeable results as early as three weeks after treatment, with the most dramatic results appearing after two to three months.

It’s important to note that CoolSculpting is not a weight-loss treatment, and it is not meant to be a substitute for healthy lifestyle choices. It is primarily intended for individuals who have localized areas of stubborn fat that are resistant to diet and exercise

The choice between AirSculpt and CoolSculpting depends on various factors, including individual preferences, treatment goals, and the specific characteristics of each procedure. Here are some key points to consider when comparing AirSculpt and CoolSculpting:

  1. Technique: AirSculpt is a minimally invasive procedure that involves the gentle removal of fat cells using a small cannula and controlled pulses of air. CoolSculpting, on the other hand, is a non-invasive procedure that uses controlled cooling to freeze and destroy fat cells.
  2. Precision and Customization: AirSculpt allows for more precise and targeted fat removal. The surgeon can sculpt and contour the treated area, providing a more customized outcome. CoolSculpting, being non-invasive, treats larger areas and may not offer the same level of precision.
  3. Downtime and Recovery: AirSculpt typically involves a shorter downtime compared to traditional liposuction, with most patients able to resume normal activities within a few days. CoolSculpting is a non-surgical procedure that usually requires minimal downtime, allowing patients to return to their daily routine immediately after the treatment.
  4. Treatment Areas: Both AirSculpt and CoolSculpting can be used to target various areas of the body, such as the abdomen, thighs, arms, and love handles. However, AirSculpt may be more suitable for treating smaller, delicate areas that require precise sculpting.
  5. Results and Longevity: Both procedures can provide noticeable results, but the timeline for seeing the final outcome may vary. With AirSculpt, results can typically be seen immediately, while CoolSculpting may require several weeks or months for the full effects to become apparent. The longevity of results will depend on individual factors, such as lifestyle choices and weight management.

Ultimately, the decision between AirSculpt and CoolSculpting should be based on a thorough discussion with a qualified medical professional who can assess your specific goals, examine your individual circumstances, and recommend the most suitable option for you. Consulting with a reputable clinic and discussing your expectations and concerns can help you make an informed decision.

Side effects of Airsculpt

Like any medical procedure, AirSculpt can have potential side effects, although they are generally minimal. It’s important to note that individual experiences may vary, and not everyone will experience the same side effects. Here are some possible side effects associated with AirSculpt:

  1. Temporary Discomfort: After the procedure, it is common to experience mild discomfort, swelling, bruising, or soreness in the treated area. These effects are usually temporary and subside within a few days to a few weeks.
  2. Swelling and Bruising: Swelling and bruising are normal after AirSculpt and are typically resolved over time. The extent of swelling and bruising can vary depending on the individual and the treated area.
  3. Numbness or Sensation Changes: Some patients may experience temporary numbness or changes in sensation in the treated area. This is usually temporary and resolves as the healing process progresses.
  4. Scarring: AirSculpt involves small incisions for the insertion of the cannula. While the incisions are generally small and strategically placed to minimize scarring, some minimal scarring may still occur. However, scars from AirSculpt tend to be small and discreet.
  5. Infection and Complications: Although rare, there is a risk of infection or other complications associated with any surgical procedure. It’s important to follow post-operative care instructions, including keeping the treated area clean and monitoring for any signs of infection or complications.
  6. Uneven Results: In some cases, there may be slight unevenness or asymmetry in the treated area. This can occur due to various factors, including individual healing responses, swelling, or the complexity of the case. However, these irregularities can often be addressed and corrected during the postoperative period.

It’s crucial to consult with a qualified and experienced medical professional who can assess your individual circumstances, discuss the potential risks and side effects specific to your situation, and provide guidance on how to minimize any potential complications. By following pre and post-operative instructions and maintaining open communication with your healthcare provider, you can help minimize the risk of side effects and achieve optimal results.

Risks and benefits of Airsculpt

AirSculpt, like any medical procedure, has both risks and benefits. Here are some potential risks and benefits associated with AirSculpt:


  1. Infection: Although rare, there is a risk of infection at the incision sites. Following proper post-operative care instructions can help minimize this risk.
  2. Bleeding and Hematoma: Excessive bleeding or the formation of a hematoma (a collection of blood) can occur, although it is uncommon. Surgeons take precautions to minimize these risks.
  3. Numbness or Sensation Changes: Some individuals may experience temporary numbness or changes in sensation in the treated area. These effects typically resolve as the healing process progresses.
  4. Scarring: AirSculpt involves small incisions, which can result in minimal scarring. However, the scars are generally small and discreet.
  5. Uneven Results: In some cases, there may be slight unevenness or asymmetry in the treated area. This can occur due to various factors, but can often be addressed during the post-operative period.


  1. Targeted Fat Reduction: AirSculpt allows for precise and targeted fat removal, resulting in enhanced body contours and improved proportions.
  2. Minimally Invasive: AirSculpt is a minimally invasive procedure performed under local anesthesia, which generally leads to less downtime and a faster recovery compared to traditional liposuction.
  3. Customizable Results: AirSculpt provides a degree of customization, allowing surgeons to sculpt and contour the treated area according to individual goals and preferences.
  4. Immediate Results: Patients typically see immediate improvements after AirSculpt, with final results becoming more apparent as the body heals and swelling subsides.
  5. Long-lasting Results: When combined with a healthy lifestyle, the results of AirSculpt can be long-lasting, as the fat cells removed are permanently eliminated from the treated area.

It’s important to note that the risks and benefits can vary depending on individual factors, such as overall health, the expertise of the surgeon, and adherence to pre-and post-operative instructions. Consulting with a qualified and experienced medical professional who specializes in AirSculpt is crucial to fully understanding the potential risks and benefits specific to your situation. They can provide personalized advice and guidance based on your unique needs and circumstances.

How to save cost on Airsculpt?

If you’re looking to save costs on an AirSculpt procedure, here are a few suggestions:

  1. Research and Compare: Take the time to research different clinics and surgeons that offer AirSculpt in your area. Compare their prices, credentials, and patient reviews to find a reputable and reasonably priced option.
  2. Consultation and Evaluation: Schedule consultations with multiple clinics or surgeons to discuss your goals and receive personalized treatment plans. During these consultations, you can inquire about any promotional offers, discounts, or package deals they may have available.
  3. Treatment Area Selection: Consider focusing on smaller treatment areas instead of multiple or larger areas. Treating a smaller area typically requires less time and resources, which can result in lower costs.
  4. Combination Treatments: Inquire about the possibility of combining multiple treatments or procedures, such as AirSculpt with other non-surgical treatments or cosmetic procedures. Some clinics offer package deals or discounts when multiple treatments are performed together.
  5. Financing Options: Explore financing options offered by the clinic or through third-party providers. Many clinics offer flexible payment plans that allow you to pay for the procedure in installments, making it more affordable over time.
  6. Timing and Promotions: Keep an eye out for seasonal promotions or special offers that clinics may run. They might offer discounted rates or incentives during specific periods, which can help reduce the overall cost.
  7. Ask about Additional Fees: Inquire about any additional fees or costs associated with the procedure, such as post-operative garments, follow-up visits, or medications. Understanding the full cost upfront can help you budget more effectively.

Remember, while cost is an important consideration, it’s crucial to prioritize the qualifications and experience of the surgeon and the quality of the clinic when choosing an AirSculpt provider. Safety, expertise, and desired outcomes should always be the primary factors in your decision-making process.


In conclusion, AirSculpt is a minimally invasive body contouring procedure that offers targeted fat removal and sculpting. By using a gentle spinning motion and controlled pulses of air, AirSculpt can provide immediate and customizable results with minimal downtime and scarring. While it is essential to consider the potential risks and costs associated with the procedure, AirSculpt offers benefits such as precise fat reduction, long-lasting results, and the ability to enhance body contours. However, individual experiences and outcomes may vary, and it is essential to consult with a qualified medical professional to determine if AirSculpt is suitable for your specific goals and circumstances. They can provide personalized advice, assess potential risks, and guide you toward achieving your desired body shape.

Leave a Comment

error: Content is protected !!
Copy link
Powered by Social Snap